MP-SC-61E
MP-SC-61E is the HDMI 2.0 6x1 Presentation Switcher which allows selection of six different sources (three HDMI inputs, one USB C input, one DisplayPort input and one VGA input), and will switch the selected video to HDMI output. It supports video resolution up to 4Kx2K@60Hz 4:4:4 8 bit , 1080P and 3D In addition, there is the smart built in EDID setting can be selected by the 4 pin DIP switch on the rear panel. It supports stereo and multichannel audio on the HDMI inputs. In addition to the audio embedded in the HDMI output stream, the audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output. It features multiple methods of control. When in the AUTO mode the switcher will automatically switch to the first detected source device When the active source is removed, the switcher will switch from input 1 to 6. The switcher can be manually controlled by the front panel buttons.
- Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4 8 bit 1080P and 3D
- 18Gbps high bandwidth and supports HDR 10.
- HDCP 2.3 compliant.
- Supports automatic switching
- CEC control for display volume and ON/ O FF.
- Controllable via RS232 and IR.
- VGA resolution is selectable on the front panel.
- Optical and balanced analog audio for audio de embedding.
- Smart EDID management for various application and customized setting.
| Video | |
| Video Input | (2) HDMI/MHL, (1) HDMI, (1) USB-C, (1) DP, (1) VGA |
| Video Input Connector | (3) Type-A female HDMI, (1) Type-C USB 3.0, (1) DisplayPort, (1) 15-pin female VGA |
| HDMI Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| MHL Input Resolution | Up to 1080P@60Hz |
| USB-C Input Resolution | Up to 4Kx2K@30Hz |
| DP Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| VGA Input Resolution | Up to 1920x1200@50/60Hz |
| Video Output | (1) HDMI |
| Video Output Connector | (1) Type-A female HDMI |
| HDMI Output Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| HDMI Version | 2.0 |
| HDCP Version | 2.3 |
| MHL Version | 2.2 |
| DP Version | 1.2 |
| HDR 10 | Supported |
| CEC | Supported |
| HPD | Supported |
| Audio | |
| Audio Output | (1) OPTICAL, (1) Stereo balanced L/R |
| Audio Output Connector | (1) Toslink connector, (1) 5 pin terminal block |
| HDMI Audio Format | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS: X™, and DTS-HD® Master Audio™ pass-through. |
| DP Audio Format | 8 channels LPCM, up to 24bit 192Khz, AC3, DTS |
| Stereo analog L/R audio Format | PCM |
| Toslink Digital Audio Format | PCM, Dolby Digital, DTS, DTS-HD |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal |
| THD+N | <0.05% (-80dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
| SNR | >80dB, 20Hz ~ 20KHz bandwidth |
| Crosstalk Isolation | >70dB, 10KHz sine at 0dBFS level (or max level before clipping) |
| L-R Level Deviation | < 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) |
| Frequency Response Deviation | <±0.5dB 20Hz ~ 20KHz |
| Output Load Capability | 1KΩ and higher (supports 10x paralleled 10KΩ loads) |
| Stereo Channel Separation | >70dB@1KHz |
| Control Part | |
| Control | (1) FW, (1) EDID, (1) IR IN, (1) RS232, (1) TCP/IP |
| Control Connector | (1) Micro-USB, (1) 4-pin DIP switch, (1) 3.5mm mini jack, (1) 3-pin terminal block, (1) RJ45 |
| General | |
| HDMI 2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 10m, 1080P ≤ 15m |
| Bandwidth | 1Gbps |
| Operation Temperature | -10℃ ~ +55℃ |
| Storage Temperature | -25℃ ~ +70℃ |
| Relative Humility | 10%-90% |
| External Power Supply | Input: AC 100~240V, 50/60Hz, Output: 12V DC 2A |
| Power Consumption | 10W (Max) |
| Dimension (W*H*D) | 342.5mm x 26mm x 115mm |
| Net Weight | 620g |
