MP-DA24UHD
MP-DA24UHD is a HDMI 2.0 2x4 Splitter, which can distribute either one of two HDMI inputs to four outputs. It supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080P 3D and multichannel audio formats. Except passing EDID information from the display, there are multiple built-in EDID settings can be selected by the 4-pin DIP switch on the rear panel. It can de-embed HDMI digital audio to stereo analog L/R and Toslink SPDIF audio outputs to provide audio sources for existing audio system.
- Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4.
- HDMI inputs support HDCP 2.2 and the outputs support HDCP1.4.
- Fully compliant with the HDMI 2.0 and HDCP 2.2 specifications.
- Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080P output for compatibility with 1080P display.
- 18Gbps high bandwidth.
- Features RCA (L/R) jack and Toslink connector for audio de-embedded.
- Advanced EDID management: multiple preset and user defined allowed.
- Built-in equalizer for signal enhancement to avoid signal attenuation in transmission.
- Supports CEC control to turn on/off displays and adjust their volume.
- Provides LEDs to indicate the current operating status and to assist troubleshooting and installation.
- Firmware upgrade by Micro-USB port.
| Video Input | |
| Input | (2) HDMI |
| Input Connector | (2) Female type-A HDMI |
| HDMI Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| HDMI Standard | 2.0 |
| HDCP Version | 2.2 |
| CEC | Supported |
| Video Output | |
| Output | (4) HDMI |
| Output Connector | (4) Female type-A HDMI |
| HDMI Output Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| HDMI Standard | 2.0 |
| CEC | Supported |
| Audio | |
| De-embedded Output | (1) AUDIO OUT; (1) SPDIF OUT |
| Output Connector | (1) RCA (L/R) jack; (1) Toslink connector |
| HDMI Audio Format | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through. |
| Stereo Analog L/R Audio Format | PCM |
| Toslink Digital Audio Format | PCM, Dolby Digital, DTS, DTS-HD |
| Frequency Response | 20Hz ~ 20KHz, ±3dB |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal |
| THD+N | <0.05% (-80 dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
| SNR | >80dB, 20Hz ~ 20KHz bandwidth |
| Crosstalk Isolation | >70dB, 10KHz sine at 0dBFS level (or max level before clipping) |
| L-R Level Deviation | < 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) |
| Frequency Response Deviation | <± 0.5dB 20Hz ~ 20 KHz |
| Output Load Capability | 1K ohm and higher (supports 10x paralleled 10k ohm loads) |
| Stereo Channel Separation | >70dB@1kHz |
| Control | |
| Control Part | (5) Control buttons; (1) EDID 3-pin DIP switch; (1) EDID 4-pin DIP switch; (1) Micro-USB port |
| General | |
| Bandwidth | 18Gbps |
| Operation Temperature | -10℃ ~ +55℃ |
| Storage Temperature | -25℃ ~ +70℃ |
| Relative Humility | 10%-90% |
| Power Supply | Input:100V~240V AC; Output: 12V DC 1A |
| Power Consumption | 12W(Max) |
| Dimension (W*H*D) | 232mm x 20mm x 100mm |
| Net Weight | About 660g |
