MP-MUH2-42T
MP-MUH2-42T is a professional 4x2 matrix switcher. It is a four-input by two-output matrix switcher with two HDBaseT inputs, two HDMI inputs and two HDBaseT + HDMI outputs. The switcher transmits 4K video to distances up to 131 feet (40 meters) and 1080p video to distances up to 230 feet (70 meters) over a single CATx cable. The HDBaseT inputs and outputs support 48V Power over Cable (PoC) feature, allowing the compatible transmitters and receivers to draw their power from the matrix over the CATx cable. It supports downscaling so a 4K video input can automatically be down scaled to a 1080p output when connecting a display that only supports resolution up to 1080p.
- 4x2 matrix switcher with HDBaseT inputs and outputs.
- Fully compliant with the HDMI V2.0 and HDCP 2.2.
- Supports video resolution up to 4K@60Hz 4:4:4, HDR10, Dolby Vision.
- Supports auto-switching.
- Features two mirrored HDMI outputs for two HDBaseT outputs, and all outputs support 4K to 1080p down-scaling.
- HDBaseT inputs and outputs support 48V PoC, allowing the transmitters and receivers to draw their power from the matrix switcher over CATx cables.
- Visually lossless video de-compression and compression for HDMI signals transmission up to 40m at 4K and 70m at 1080p on HDBaseT inputs and outputs.
- Supports Stereo + SPDIF audio outputs for audio de-embedding.
- Controllable via front panel buttons, RS232, IR and TCP/IP (built-in GUI).
| Video Input | |
| Input | (2) HDBaseT, (2) HDMI |
| Input Connector | (2) RJ45, (2) Type-A female HDMI |
| HDMI Input Resolution | Up to 4K@60Hz 4:4:4, HDR10, Dolby Vision |
| HDBaseT Input Resolution | Up to 4K@60Hz 4:2:0 |
| Video Output | |
| Output | (2) HDBaseT, (2) HDMI |
| Output Connector | (2) RJ45, (2) Type-A female HDMI |
| HDMI Output Resolution | Up to 4K@60Hz 4:4:4, HDR10, Dolby Vision. Supports 4K to 1080p down-scaling. |
| HDBaseT Output Resolution | Up to 4K@60Hz 4:2:0. Supports 4K to 1080p down-scaling. |
| HDMI Audio Signal | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through. |
| Audio Output | |
| Output | (1) Stereo analog audio, (1) SPDIF audio |
| Output Connector | (1) 3.5mm jack, (1) Toslink connector |
| Analog L+R Audio Format | PCM 2CH |
| Digital SPDIF Audio Format | PCM, Dolby Digital, DTS, DTS-HD |
| Max Output Level | Stereo: 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal. SPDIF: ±0.05dBFS |
| Frequency Response | 20Hz to 20kHz, ±1dB |
| THD+N | < 0.05%, 20Hz to 20kHz bandwidth, 1kHz sine at 0dBFS level (or max level) |
| SNR | Stereo: >80dB, 20Hz to 20kHz bandwidth SPDIF: > 90dB, 20Hz to 20kHz bandwidth |
| Crosstalk Isolation | Stereo: < -80dB, 10kHz sine at 0dBFS level (or max level before clipping) SPDIF: < -70dB, 10KHz sine at 0dBFS level (or max level before clipping). |
| L-R Level Deviation | Stereo: < 0.05dB, 1kHz sine at 0dBFS level (or max level before clipping) |
| Output Load Capability | Stereo: 1KΩ and higher (Supports 10x paralleled 10KΩ loads). |
| Noise Level | Stereo: -80dB. SPDIF: -90dB |
| Control | |
| Control port | (1) FW, (1) RS232, (1) IR EYE, (1) TCP/IP |
| Control Connector | (1) Micro-USB, (1) 3-pin terminal block, (1) 3.5mm jack, (1) RJ45 |
| General | |
| HDMI Version | 2.0 |
| HDCP Version | 2.2 |
| Transmission Mode | HDBaseT |
| Transmission Distance | 1080p ≤ 230 feet (70 meters), 4K@60Hz ≤ 131 feet (40 meters) |
| Bandwidth | 18Gbps |
| Operation Temperature | -5 to +55℃ (+23° to +131°F) |
| Storage Temperature | -25 to +70℃ (-13° to +158°F) |
| Relative Humidity | 10% to 90%, Non-condensing |
| External Power Supply | Input: 100 to 240V AC, 50/60Hz; Output: 24V DC 5A |
| Power Consumption | 45W (Max) |
| Dimension (W*H*D) | 300mm x 25mm x 220mm |
| Net Weight | 1.6Kg |
